ASTM F1554 Anchor Bolt

AED0.00

CUSTOMIZED ANCHOR BOLTS

MANUFACTURING CAPACITY:

M12-M125

STANDARD

ASTM F1554, ISO898-1

MATERIAL

Carbon Steel, Alloy Steel, A36

CERTIFICATE

EN10204.3.1 (2004)

Clear
SKU: N/A Category:

Description

ASTM F1554  Anchor Bolt.

The ASTM F1554  Anchor Bolt specification was introduced in 1994 and covers  designed to anchor structural supports to concrete foundations.

In grade A36, 55, 105 anchor bolts are manufactured from A36, but low carbon steel., carbon steel and alloy steel. Run-of-the-mill bolt grade covering in diameters ranging from M12 / 1/2″ through 125mm / 4″.

In grade A36 Grade are manufactured from low carbon steel. This is your standard, run-of-the-mill bolt grade covering in diameters ranging from 1/2″ through 4″. In August of 2007, F1554 grade 36 replaced ASTMA307 grade C which also covered mild steel anchor bolts.

In this standard specification for straight and bent, headed and headless anchor bolts with specific yield strengths. The bolts are manufactured from carbon, carbon boron, alloy, or high-strength low-alloy steel. F1554 grade 36 replaced ASTM A307 grade C which also covered mild steel.

Additional information

Size

M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M39, M42, M45, M48, M52, M56, M60, M64, M68, M72, M76, M80, M85, M90, M100, M110, M125

Length

100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 170mm, 180mm, 190mm, 200mm, 210mm, 220mm, 230mm, 240mm, 250mm, 260mm, 270mm, 280mm, 290mm, 300mm, 310mm, 320mm, 330mm, 340mm, 350mm, 360mm, 370mm, 380mm, 390mm, 400mm, 410mm, 420mm, 430mm, 440mm, 450mm, 460mm, 470mm, 480mm, 490mm, 500mm, 510mm, 520mm, 530mm, 540mm, 550mm, 560mm, 570mm, 580mm, 590mm, 600mm, 610mm, 620mm, 630mm, 640mm, 650mm, 660mm, 670mm, 680mm, 690mm, 700mm, 710mm, 720mm, 730mm, 740mm, 750mm, 760mm, 770mm, 780mm, 790mm, 800mm, 810mm, 820mm, 830mm, 840mm, 850mm, 860mm, 870mm, 88mm, 890mm, 900mm, 910mm, 920mm, 930mm, 940mm, 950mm, 960mm, 970mm, 980mm, 990mm, 1000mm, over 1000mm Req Drawing

Nuts

None, 1, 2, 3, 4, 5

Washer

None, 1, 2, 3, 4, 5

Grade

A36, S275JR, 8.8, 10.9

Plate Washer

None, 70x70x6mm, 70x70x10mm, 70x70x12mm, 70x70x16mm, 70x70x20mm, 70x70x25mm, 70x70x30mm, 70x70x40mm, 80x80x6mm, 80x80x10mm, 80x80x12mm, 80x80x16mm, 80x80x20mm, 80x80x25mm, 80x80x30mm, 80x80x40mm, 100x100x6mm, 100x100x10mm, 100x100x12mm, 100x100x16mm, 100x100x20mm, 100x100x25mm, 100x100x30mm, 100x100x40mm, 110x110x6mm, 110x110x10mm, 110x110x12mm, 110x110x16mm, 110x110x20mm, 110x110x25mm, 110x110x30mm, 110x110x40mm, 120x120x6mm, 120x120x10mm, 120x120x12mm, 120x120x16mm, 120x120x20mm, 120x120x25mm, 120x120x30mm, 120x120x40mm, 150x150x6mm, 150x150x10mm, 150x150x12mm, 150x150x16mm, 150x150x20mm, 150x150x25mm, 150x150x30mm, 150x150x40mm, 200x200x6mm, 200x200x10mm, 200x200x12mm, 200x200x16mm, 200x200x20mm, 200x200x25mm, 200x200x30mm, 200x200x40mm

Plate Grade

S275Jr, S355Jr

Sleeve

None, 2”x 150mm, 2”x175mm, 2”x200mm, 2”x 225mm, 2”x250mm, 2”x275mm, 2”x300mm, 2”x325mm, 2”x350mm, 2”x375mm, 2”x400mm, 2”x425mm, 2”x450mm, 2”x475mm, 2”x500mm, 3”x 150mm, 3”x175mm, 3”x200mm, 3”x 225mm, 3”x250mm, 3”x275mm, 3”x300mm, 3”x325mm, 3”x350mm, 3”x375mm, 3”x400mm, 3”x425mm, 3”x450mm, 3”x475mm, 3”x500mm, 4”x 150mm, 4”x175mm, 4”x200mm, 4”x 225mm, 4”x250mm, 4”x275mm, 4”x300mm, 4”x325mm, 4”x350mm, 4”x375mm, 4”x400mm, 4”x425mm, 4”x450mm, 4”x475mm, 4”x500mm

Sleeve Type

None, Wilson Sleeve, Steel Sleeve

Coating

Black, Decromat, Electro Galvanized B633, HDG, Greenkote, Self Finish, Yellow (Cadmiun)

Thread Top

Plain, 40mm, 50mm, 75mm, 80mm, 100mm, 120mm, 130mm, 140mm, 150mm, 175mm, 200mm, 250mm, 300mm

Thread Bottom

Plain, 40mm, 50mm, 75mm, 80mm, 100mm, 120mm, 130mm, 140mm, 150mm, 175mm, 200mm, 250mm, 300mm

TackWeld

Yes, No, Req Drawing

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.