Bending is a manufacturing process that produces a V-shape, U-shape, or channel shape along a straight axis in ductile materials. Hence most commonly sheet metal. Commonly used equipment includes box and pan brakes, brake presses, and other specialized machine presses.
In press brake forming, a workpiece is positioned over the die block and the die block presses the sheet to form a shape. Usually bending has to overcome both tensile stresses and compressive stresses. When bending is done, the residual stresses cause the material to spring back towards its original position, so the sheet must be over-bent to achieve the proper bend angle. The amount of spring back is dependent on the material, and the type of forming. When sheet metal is bent, it stretches in length. The bend deduction is the amount the sheet metal will stretch when bent as measured from the outside edges of the bend. The bend radius refers to the inside radius. The formed bend radius is dependent upon the dies used, the material properties, and the material thickness. The U-punch forms a U-shape with a single punch
Our Capacity to bend steel material from 12mm to 100mm.
Only logged in customers who have purchased this product may leave a review.